Energy Exchanger - Revision history

Bawt888: Energy exchangers got an upgrade increasing their power output and allowing for accumulator proliferation

2024-08-16T12:22:37Z

Energy exchangers got an upgrade increasing their power output and allowing for accumulator proliferation

← Older revision		Revision as of 12:22, 16 August 2024
Line 8:		Line 8:
	The Energy Exchanger has three modes of operation: Charge, Idle, and Discharge.		The Energy Exchanger has three modes of operation: Charge, Idle, and Discharge.

	* In Charge mode, the Energy Exchanger accepts empty Accumulators and uses energy from the power grid ~~(up to 45 MW)~~ to rapidly charge them into Full Accumulators. External logistics (e.g. [[Conveyor Belts]], [[Planetary Logistics Station\|Planetary Logistics Stations]], and [[Interstellar Logistics Station\|Interstellar Logistics Stations]]) can then send the Full Accumulators to other destinations.		* In Charge mode, the Energy Exchanger accepts empty [[Accumulator\|Accumulators]] and uses excess energy from the power grid to rapidly charge them into [[Full Accumulator\|Full Accumulators]]. The base maximum charging power is 54 MW, it can, however, be increased to 108 MW by spraying the Accumulators with [[Proliferator Mk.III\|Proliferator MK.III]]. Notably, the spray does not use up and remains effective during the charging or discharging process, ensuring that the performance increase is permanent. External logistics (e.g. [[Conveyor Belts]], [[Planetary Logistics Station\|Planetary Logistics Stations]], and [[Interstellar Logistics Station\|Interstellar Logistics Stations]]) can then send the Full Accumulators to other destinations.
	* In Discharge mode, the Energy Exchanger accepts Full Accumulators and releases their energy into the power grid at 45 MW. Empty Accumulators can be removed from it and sent back to Energy Exchangers in Charge mode to be refilled.		*In Discharge mode, the Energy Exchanger accepts Full Accumulators and releases their energy into the power grid. The maximum discharge rate is the same as the charge rate (54 MW for non proliferated Accumulators and up to 108 MW for Accumulators sprayed with Proliferator MK.III). Empty Accumulators can be removed from it and sent back to Energy Exchangers in Charge mode to be refilled. While the Energy Exchanger in discharge mode will try to match the energy demand of the grid, they ignore all other sources of energy (e.g. [[Wind Turbine\|Wind Turbines]], [[Ray Receiver\|Ray Receivers]] and [[Artificial Star\|Artificial Stars]]), which can result in a waste of energy if different types of power sources are used on the same grid.
			*It is possible to balance the Energy Exchangers so that they charge when there is excess energy on the grid and discharge when the demand is high, so that no energy is wasted. To achieve this ensure the total maximum charging power of your Energy Exchangers set to charge mode is always greater the excess power on the grid. For example, lets say a grid is powered by 150 Wind Turbines, 25 [[Thermal Power Plant\|Thermal Power Plants]], and 1 Energy Exchanger set to discharge mode for a total of 45 MW + 54 MW + 54 MW = 153 MW. Additionally the grid never uses LESS than 60 MW. To ensure no energy is ever wasted we need the maximum charging power to exceed 153 MW - 60 MW = 93 MW, which is easily covered by 2 Energy Exchangers.

	==Production Chain==		==Production Chain ==
	{{ProductionChainTable/head}}		{{ProductionChainTable/head}}
	{{ProductionChain		{{ProductionChain
Line 35:		Line 36:

	==Player Tips & Tricks==		==Player Tips & Tricks==
	* By harvesting energy on planets with high solar or wind efficiency, the player can gather large amounts of energy and send it to other planets.		*By harvesting energy on planets with high solar or wind efficiency, the player can gather large amounts of energy and send it to other planets.
	* The number of Accumulators necessary to facilitate long-distance power transmission is large. Be prepared to build many Accumulators for this dedicated purpose.		*The number of Accumulators necessary to facilitate long-distance power transmission is large. Be prepared to build many Accumulators for this dedicated purpose.
	* The Energy Exchanger will consume up to 45 MW when filling Accumulators, filling an Accumulator in 6 seconds at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only as much power is remaining, resulting in slower charge times. Ensure a stable power supply to prevent interruptions in Accumulator distribution networks.		*The Energy Exchanger will consume up to 54 MW when filling Accumulators, filling an Accumulator in 10 seconds at full power. If the power available in the power grid is less than 54 MW, then the Energy Exchanger will consume only as much power is remaining, resulting in slower charge times. Ensure a stable power supply to prevent interruptions in Accumulator distribution networks.
	* The Energy Exchanger will always discharge at its maximum 45 MW rate (unless that exceeds the total power usage of the grid). This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This means that other power generators will have lower demand, causing them to slow down or even stop. If the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn excess materials, the Energy Exchanger may lead to bottlenecks that halt production. To prevent this, have an additional array of Energy Exchangers on the same network in Charge mode, and have the Exchangers in Discharge mode prioritize moving Accumulators around just that planet, rather than any off-world sources. This ensures that excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, thereby ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.		*The Energy Exchanger will always discharge at its maximum 54 MW rate (unless that exceeds the total power usage of the grid). This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This means that other power generators will have lower demand, causing them to slow down or even stop. If the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn excess materials, the Energy Exchanger may lead to bottlenecks that halt production. To prevent this, have an additional array of Energy Exchangers on the same network in Charge mode, and have the Exchangers in Discharge mode prioritize moving Accumulators around just that planet, rather than any off-world sources. This ensures that excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, thereby ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.
	* Since the Energy Exchanger's power output is constant, it is not intended to balance the power grid (as stated above, it simply reduces the load on other power sources, rather than reducing its own load). However, it can still be used for this purpose nonetheless. This is done by building a conveyor loop that is completely occupied by filler items, with a secondary conveyor loop carrying Accumulators between the Energy Exchangers. When the power grid's needs are not met, the Sorters outputting filler items will slow down, allowing Full Accumulators to make their way to the discharging Energy Exchanger. A more in-depth explanation can be found [https://www.gamepretty.com/dyson-sphere-program-how-to-use-energy-exchangers-balancing-your-local-power-network/ here].		*Since the Energy Exchanger's power output is constant, it is not intended to balance the power grid (as stated above, it simply reduces the load on other power sources, rather than reducing its own load). However, it can still be used for this purpose nonetheless. This is done by building a conveyor loop that is completely occupied by filler items, with a secondary conveyor loop carrying Accumulators between the Energy Exchangers. When the power grid's needs are not met, the Sorters outputting filler items will slow down, allowing Full Accumulators to make their way to the discharging Energy Exchanger. A more in-depth explanation can be found [https://www.gamepretty.com/dyson-sphere-program-how-to-use-energy-exchangers-balancing-your-local-power-network/ here].
	{{Item Navbox}}		{{Item Navbox}}
	[[Category:Item]]		[[Category:Item]]

imported>76561198291663882: Added tip about how to use Energy Exchangers for power grid balancing

2023-02-13T21:04:23Z

Added tip about how to use Energy Exchangers for power grid balancing

← Older revision		Revision as of 21:04, 13 February 2023
Line 38:		Line 38:
	* The number of Accumulators necessary to facilitate long-distance power transmission is large. Be prepared to build many Accumulators for this dedicated purpose.		* The number of Accumulators necessary to facilitate long-distance power transmission is large. Be prepared to build many Accumulators for this dedicated purpose.
	* The Energy Exchanger will consume up to 45 MW when filling Accumulators, filling an Accumulator in 6 seconds at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only as much power is remaining, resulting in slower charge times. Ensure a stable power supply to prevent interruptions in Accumulator distribution networks.		* The Energy Exchanger will consume up to 45 MW when filling Accumulators, filling an Accumulator in 6 seconds at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only as much power is remaining, resulting in slower charge times. Ensure a stable power supply to prevent interruptions in Accumulator distribution networks.
	* The Energy Exchanger will always discharge at its maximum 45 MW rate (unless that exceeds the total power usage of the grid). This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This means that other power generators will have lower demand, causing them to slow down or even stop. If the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn excess materials, the Energy Exchanger may lead to bottlenecks that halt production. To prevent this, have an additional array of Energy Exchangers on the same network in Charge mode, and have the Exchangers in Discharge mode prioritize moving Accumulators around just that planet, rather than any off-world sources. This ensures that excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, thereby ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.~~<br />~~		* The Energy Exchanger will always discharge at its maximum 45 MW rate (unless that exceeds the total power usage of the grid). This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This means that other power generators will have lower demand, causing them to slow down or even stop. If the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn excess materials, the Energy Exchanger may lead to bottlenecks that halt production. To prevent this, have an additional array of Energy Exchangers on the same network in Charge mode, and have the Exchangers in Discharge mode prioritize moving Accumulators around just that planet, rather than any off-world sources. This ensures that excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, thereby ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.
			* Since the Energy Exchanger's power output is constant, it is not intended to balance the power grid (as stated above, it simply reduces the load on other power sources, rather than reducing its own load). However, it can still be used for this purpose nonetheless. This is done by building a conveyor loop that is completely occupied by filler items, with a secondary conveyor loop carrying Accumulators between the Energy Exchangers. When the power grid's needs are not met, the Sorters outputting filler items will slow down, allowing Full Accumulators to make their way to the discharging Energy Exchanger. A more in-depth explanation can be found [https://www.gamepretty.com/dyson-sphere-program-how-to-use-energy-exchangers-balancing-your-local-power-network/ here].
	{{Item Navbox}}		{{Item Navbox}}
	[[Category:Item]]		[[Category:Item]]

imported>76561198201266937: Added a clarification about discharge rate if the grid demand is low

2023-02-13T00:46:35Z

Added a clarification about discharge rate if the grid demand is low

← Older revision		Revision as of 00:46, 13 February 2023
Line 38:		Line 38:
	* The number of Accumulators necessary to facilitate long-distance power transmission is large. Be prepared to build many Accumulators for this dedicated purpose.		* The number of Accumulators necessary to facilitate long-distance power transmission is large. Be prepared to build many Accumulators for this dedicated purpose.
	* The Energy Exchanger will consume up to 45 MW when filling Accumulators, filling an Accumulator in 6 seconds at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only as much power is remaining, resulting in slower charge times. Ensure a stable power supply to prevent interruptions in Accumulator distribution networks.		* The Energy Exchanger will consume up to 45 MW when filling Accumulators, filling an Accumulator in 6 seconds at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only as much power is remaining, resulting in slower charge times. Ensure a stable power supply to prevent interruptions in Accumulator distribution networks.
	* The Energy Exchanger will always discharge at its maximum 45 MW rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This means that other power generators will have lower demand, causing them to slow down or even stop. If the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn excess materials, the Energy Exchanger may lead to bottlenecks that halt production. To prevent this, have an additional array of Energy Exchangers on the same network in Charge mode, and have the Exchangers in Discharge mode prioritize moving Accumulators around just that planet, rather than any off-world sources. This ensures that excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, thereby ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.<br />		* The Energy Exchanger will always discharge at its maximum 45 MW rate (unless that exceeds the total power usage of the grid). This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This means that other power generators will have lower demand, causing them to slow down or even stop. If the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn excess materials, the Energy Exchanger may lead to bottlenecks that halt production. To prevent this, have an additional array of Energy Exchangers on the same network in Charge mode, and have the Exchangers in Discharge mode prioritize moving Accumulators around just that planet, rather than any off-world sources. This ensures that excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, thereby ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.<br />
	{{Item Navbox}}		{{Item Navbox}}
	[[Category:Item]]		[[Category:Item]]

imported>76561197968421706: /* Summary */

2023-02-12T05:46:26Z

Summary

← Older revision		Revision as of 05:46, 12 February 2023
Line 4:		Line 4:
	==Summary==		==Summary==

	The '''Energy Exchanger''' is a facility whose purpose is to charge and discharge [[Accumulator\|Accumulators]] automatically. Although the associated technology is [[Interstellar Power Transmission (Tech)\|Interstellar Power Transmission]], which makes it sound like it can beam energy ~~thorough~~ space. It merely puts excess energy into Accumulators or discharges energy from them.		The '''Energy Exchanger''' is a facility whose purpose is to charge and discharge [[Accumulator\|Accumulators]] automatically. Although the associated technology is [[Interstellar Power Transmission (Tech)\|Interstellar Power Transmission]], which makes it sound like it can beam energy through space. It merely puts excess energy into Accumulators or discharges energy from them.

	The Energy Exchanger has three modes of operation: Charge, Idle, and Discharge.		The Energy Exchanger has three modes of operation: Charge, Idle, and Discharge.

imported>76561198291663882 at 03:50, 12 February 2023

2023-02-12T03:50:39Z

← Older revision		Revision as of 03:50, 12 February 2023
Line 4:		Line 4:
	==Summary==		==Summary==

	~~Many~~ ~~players~~ ~~are~~ a ~~little~~ ~~confused~~ ~~about~~ ~~the~~ ~~Energy~~ ~~Exchanger's~~ ~~purpose,~~ ~~because~~ ~~its~~ ~~unlock~~ ~~technology's~~ ~~name~~ is [[Interstellar Power Transmission (Tech)\|Interstellar Power Transmission]], which makes it sound like it can beam energy ~~across~~ ~~solar systems~~. ~~However,~~ ~~the~~ ~~actual~~ ~~building~~ ~~functions~~ ~~more~~ a ~~rechargeable~~ ~~battery~~ ~~charger/discharger,~~ ~~with~~ ~~the [[Accumulator]] serving the purpose of a battery~~. ~~The Energy Exchanger has three modes of operation: Charge, Idle, and Discharge.~~		The '''Energy Exchanger''' is a facility whose purpose is to charge and discharge [[Accumulator\|Accumulators]] automatically. Although the associated technology is [[Interstellar Power Transmission (Tech)\|Interstellar Power Transmission]], which makes it sound like it can beam energy thorough space. It merely puts excess energy into Accumulators or discharges energy from them.

			The Energy Exchanger has three modes of operation: Charge, Idle, and Discharge.
	In one location, an Energy Exchanger may be set in Charge mode, which takes in empty Accumulators and generates full Accumulators in a very short amount of time. Full Accumulators can then be transferred to other power grids via any distribution system (belts, [[Planetary Logistics Station]]s, or [[Interstellar Logistics Station]]s). At the destination power grid, an Energy Exchanger can discharge a full Accumulator, releasing an empty Accumulator.

			* In Charge mode, the Energy Exchanger accepts empty Accumulators and uses energy from the power grid (up to 45 MW) to rapidly charge them into Full Accumulators. External logistics (e.g. [[Conveyor Belts]], [[Planetary Logistics Station\|Planetary Logistics Stations]], and [[Interstellar Logistics Station\|Interstellar Logistics Stations]]) can then send the Full Accumulators to other destinations.
	Accumulators operated in this way will behave as directly placed Accumulators ''only if'' it is used as the primary power source.
			* In Discharge mode, the Energy Exchanger accepts Full Accumulators and releases their energy into the power grid at 45 MW. Empty Accumulators can be removed from it and sent back to Energy Exchangers in Charge mode to be refilled.
	Otherwise, they will dump their charge into the grid.

	==Production Chain==		==Production Chain==
Line 35:		Line 35:

	==Player Tips & Tricks==		==Player Tips & Tricks==
			* By harvesting energy on planets with high solar or wind efficiency, the player can gather large amounts of energy and send it to other planets.
	* Has great Potential to Transport a lot of Energy between Planets and Starsystems.
			* The number of Accumulators necessary to facilitate long-distance power transmission is large. Be prepared to build many Accumulators for this dedicated purpose.
	* Harvest Energy on high Solar and Wind Planets, Charge Accumulator and transport them to Planets with small Solar and Wind Yield, Discharge them.
		⚫	* The Energy Exchanger will consume up to 45 MW when filling Accumulators, filling an Accumulator in 6 seconds at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only as much power is remaining, resulting in slower charge times. Ensure a stable power supply to prevent interruptions in Accumulator distribution networks.
	* The need of Accumulators in Cycle is relatively high, be prepared to have enough for rotation.
		⚫	* The Energy Exchanger will always discharge at its maximum 45 MW rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This means that other power generators will have lower demand, causing them to slow down or even stop. If the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn excess materials, the Energy Exchanger may lead to bottlenecks that halt production. To prevent this, have an additional array of Energy Exchangers on the same network in Charge mode, and have the Exchangers in Discharge mode prioritize moving Accumulators around just that planet, rather than any off-world sources. This ensures that excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, thereby ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.<br />
⚫	* The Energy Exchanger will consume up to 45 MW ~~= 45 MJ/s~~ when filling ~~accumulators~~, filling an ~~accumulator~~ in 6s ~~(10/min)~~ at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only up to ~~100%~~ of ~~the power grid~~, ~~leading~~ to slower ~~fill~~ ~~rates~~. Ensure a stable power supply to prevent interruptions in ~~accumulator~~ distribution networks.
⚫	* The Energy Exchanger will always discharge at its maximum ~~45MW~~ rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This ~~has~~ ~~the effect of reducing demand on the~~ other power generators on ~~the~~ ~~network~~, causing them to slow down or even stop. ~~This can cause bottlenecks if, for example,~~ the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn ~~off~~ excess ~~[[Hydrogen]]~~. To prevent this, have an additional array of Energy Exchangers on the same network in ~~charge~~ mode, and have the ~~discharge~~ ~~array~~ ~~prioritise~~ ~~receiving~~ ~~accumulators~~ ~~from/returning~~ ~~accumulators~~ to ~~this~~ ~~array~~ rather than ~~the~~ off-world ~~source~~. This ensures excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.


	{{Item Navbox}}		{{Item Navbox}}
	[[Category:Item]]		[[Category:Item]]

imported>76561198211382460: Charge time updated for latest version.

2021-06-28T17:10:48Z

Charge time updated for latest version.

← Older revision		Revision as of 17:10, 28 June 2021
Line 38:		Line 38:
	* Harvest Energy on high Solar and Wind Planets, Charge Accumulator and transport them to Planets with small Solar and Wind Yield, Discharge them.		* Harvest Energy on high Solar and Wind Planets, Charge Accumulator and transport them to Planets with small Solar and Wind Yield, Discharge them.
	* The need of Accumulators in Cycle is relatively high, be prepared to have enough for rotation.		* The need of Accumulators in Cycle is relatively high, be prepared to have enough for rotation.
	* The Energy Exchanger will consume up to 45 MW = 45 MJ/s when filling accumulators, filling an accumulator in 2s (30/min) at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only up to 100% of the power grid, leading to slower fill rates. Ensure a stable power supply to prevent interruptions in accumulator distribution networks.		* The Energy Exchanger will consume up to 45 MW = 45 MJ/s when filling accumulators, filling an accumulator in 6s (10/min) at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only up to 100% of the power grid, leading to slower fill rates. Ensure a stable power supply to prevent interruptions in accumulator distribution networks.
	* The Energy Exchanger will always discharge at its maximum 45MW rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This has the effect of reducing demand on the other power generators on the network, causing them to slow down or even stop. This can cause bottlenecks if, for example, the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn off excess [[Hydrogen]]. To prevent this, have an additional array of Energy Exchangers on the same network in charge mode, and have the discharge array prioritise receiving accumulators from/returning accumulators to this array rather than the off-world source. This ensures excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.		* The Energy Exchanger will always discharge at its maximum 45MW rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This has the effect of reducing demand on the other power generators on the network, causing them to slow down or even stop. This can cause bottlenecks if, for example, the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn off excess [[Hydrogen]]. To prevent this, have an additional array of Energy Exchangers on the same network in charge mode, and have the discharge array prioritise receiving accumulators from/returning accumulators to this array rather than the off-world source. This ensures excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.

imported>76561198045853337: /* Player Tips & Tricks */

2021-06-08T12:14:19Z

Player Tips & Tricks

← Older revision		Revision as of 12:14, 8 June 2021
Line 40:		Line 40:
	* The Energy Exchanger will consume up to 45 MW = 45 MJ/s when filling accumulators, filling an accumulator in 2s (30/min) at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only up to 100% of the power grid, leading to slower fill rates. Ensure a stable power supply to prevent interruptions in accumulator distribution networks.		* The Energy Exchanger will consume up to 45 MW = 45 MJ/s when filling accumulators, filling an accumulator in 2s (30/min) at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only up to 100% of the power grid, leading to slower fill rates. Ensure a stable power supply to prevent interruptions in accumulator distribution networks.
	* The Energy Exchanger will always discharge at its maximum 45MW rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This has the effect of reducing demand on the other power generators on the network, causing them to slow down or even stop. This can cause bottlenecks if, for example, the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn off excess [[Hydrogen]]. To prevent this, have an additional array of Energy Exchangers on the same network in charge mode, and have the discharge array prioritise receiving accumulators from/returning accumulators to this array rather than the off-world source. This ensures excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.		* The Energy Exchanger will always discharge at its maximum 45MW rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This has the effect of reducing demand on the other power generators on the network, causing them to slow down or even stop. This can cause bottlenecks if, for example, the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn off excess [[Hydrogen]]. To prevent this, have an additional array of Energy Exchangers on the same network in charge mode, and have the discharge array prioritise receiving accumulators from/returning accumulators to this array rather than the off-world source. This ensures excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.


			{{Item Navbox}}
	[[Category:Item]]		[[Category:Item]]
	[[Category:Building]]		[[Category:Building]]

imported>76561198039029203: /* Player Tips & Tricks */

2021-03-24T18:04:25Z

Player Tips & Tricks

← Older revision		Revision as of 18:04, 24 March 2021
Line 39:		Line 39:
	* The need of Accumulators in Cycle is relatively high, be prepared to have enough for rotation.		* The need of Accumulators in Cycle is relatively high, be prepared to have enough for rotation.
	* The Energy Exchanger will consume up to 45 MW = 45 MJ/s when filling accumulators, filling an accumulator in 2s (30/min) at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only up to 100% of the power grid, leading to slower fill rates. Ensure a stable power supply to prevent interruptions in accumulator distribution networks.		* The Energy Exchanger will consume up to 45 MW = 45 MJ/s when filling accumulators, filling an accumulator in 2s (30/min) at full power. If the power available in the power grid is less than 45 MW, then the Energy Exchanger will consume only up to 100% of the power grid, leading to slower fill rates. Ensure a stable power supply to prevent interruptions in accumulator distribution networks.
			* The Energy Exchanger will always discharge at its maximum 45MW rate. This means when powering a world using Energy Exchangers from an off-world source, the Energy Exchangers are the primary power source for the network and all others are secondary. This has the effect of reducing demand on the other power generators on the network, causing them to slow down or even stop. This can cause bottlenecks if, for example, the player is using [[Thermal Power Station\|Thermal Power Stations]] to burn off excess [[Hydrogen]]. To prevent this, have an additional array of Energy Exchangers on the same network in charge mode, and have the discharge array prioritise receiving accumulators from/returning accumulators to this array rather than the off-world source. This ensures excess energy is continuously removed from and added back to the grid instead of pulling energy from off-world, ensuring other power generators remain at full output. The off-world source will only be used if the network's power demands grow too large for the other energy sources on the network.
	[[Category:Item]]		[[Category:Item]]
	[[Category:Building]]		[[Category:Building]]

imported>76561198174427681: /* Summary */ grammar fix in own edit

2021-03-17T20:40:00Z

Summary: grammar fix in own edit

← Older revision		Revision as of 20:40, 17 March 2021
Line 8:		Line 8:
	In one location, an Energy Exchanger may be set in Charge mode, which takes in empty Accumulators and generates full Accumulators in a very short amount of time. Full Accumulators can then be transferred to other power grids via any distribution system (belts, [[Planetary Logistics Station]]s, or [[Interstellar Logistics Station]]s). At the destination power grid, an Energy Exchanger can discharge a full Accumulator, releasing an empty Accumulator.		In one location, an Energy Exchanger may be set in Charge mode, which takes in empty Accumulators and generates full Accumulators in a very short amount of time. Full Accumulators can then be transferred to other power grids via any distribution system (belts, [[Planetary Logistics Station]]s, or [[Interstellar Logistics Station]]s). At the destination power grid, an Energy Exchanger can discharge a full Accumulator, releasing an empty Accumulator.

	Accumulators operated in this way will behave as directly placed Accumulators ''only if'' ~~use~~ ~~them~~ as the primary power source.		Accumulators operated in this way will behave as directly placed Accumulators ''only if'' it is used as the primary power source.
	Otherwise, they will dump their charge into the grid.		Otherwise, they will dump their charge into the grid.

imported>76561198174427681: /* Summary */ Reworded the summary to be more clear and encyclopaedic.

2021-03-17T20:39:17Z

Summary: Reworded the summary to be more clear and encyclopaedic.

← Older revision		Revision as of 20:39, 17 March 2021
Line 4:		Line 4:
	==Summary==		==Summary==

	Many players are a little confused about the Energy Exchanger's purpose, ~~due~~ to ~~the~~ name of ~~its~~ ~~unlock~~ ~~technology:~~ Interstellar Power Transmission makes it sound like it can beam energy across solar systems.		Many players are a little confused about the Energy Exchanger's purpose, because its unlock technology's name is [[Interstellar Power Transmission (Tech)\|Interstellar Power Transmission]], which makes it sound like it can beam energy across solar systems. However, the actual building functions more a rechargeable battery charger/discharger, with the [[Accumulator]] serving the purpose of a battery. The Energy Exchanger has three modes of operation: Charge, Idle, and Discharge.

			In one location, an Energy Exchanger may be set in Charge mode, which takes in empty Accumulators and generates full Accumulators in a very short amount of time. Full Accumulators can then be transferred to other power grids via any distribution system (belts, [[Planetary Logistics Station]]s, or [[Interstellar Logistics Station]]s). At the destination power grid, an Energy Exchanger can discharge a full Accumulator, releasing an empty Accumulator.
	In reality, think of this building and mechanic in terms of Rechargeable Batteries. For the purpose of this explanation, we will call an [[Accumulator]] a "Battery".

		⚫	Accumulators operated in this way will behave as directly placed Accumulators ''only if'' use them as the primary power source.
	In one location, you set up an Energy Exchanger in Charge mode. You feed it Empty Batteries to recharge them from the main grid, and it gives you Full Batteries.
		⚫	Otherwise, they will dump their charge into the grid.

⚫	~~The~~ ~~batteries~~ will behave as ~~Batteries you~~ ~~set~~ ~~out.~~ *ONLY IF* use them as the primary power source.
⚫	Otherwise they will dump their charge into the grid.

	You can then either store the Full Batteries for later, or transport them to an Energy Exchanger on another grid. Put that Energy Exchanger into Discharge mode

	Replace "Battery" with "Accumulator" in the above description, and you've got a good grasp of how this system works.

	==Production Chain==		==Production Chain==