Summary
The Ray Receiver is a building used to collect power generated by a Dyson Sphere/Swarm. The longer they are continuously in view of the swarm, the more efficient they become.
Initially, the Ray Receiver produces 5 MW and has a ray receiving efficiency of 30%. While continously receiving energy, the energy production increases to 12.5 MW and 42% ray receiving efficiency at 100% "Continuous receiving".
Note: The technology Planetary Ionosphere Utilization effectively removes the line-of-sight barrier to maintaining a continuous connection, presumably by bouncing the energy beams off of the planet's Ionosphere to reach the receiver wherever it may be. This is, in effect, the same way that Radio waves can travel over the horizon, on real-world Earth. For this to work, the planet must have an atmosphere, and the Ray Receiver must be supplied with a Graviton Lens.
Inserting a Graviton Lens doubles the power conversion of the Ray Receiver. With a Graviton Lens it produces 25 MW and requests more power from the Dyson Sphere accordingly. The Graviton Lens will be consumed at a rate of 0.25 Graviton Lenses per minute.
After researching Dirac Inversion Mechanism the Ray Receiver can be put in an alternative "Photon" mode where it produces Critical Photons. The Ray Receiver produces 5 Critical Photons per minute while consuming 62.5 MW. When supplied with a Graviton Lens the Ray Receiver produces 10 Critical Photons per minute and consumes 125 MW.
The ray receiving efficiency can be increased with the Ray Transmission Efficiency Upgrade. The upgrades stack multiplicatively.
The current max receiving efficiency can be calculated as follows:
100 - 70 * 0.9^small_upgrade_count * 0.85^big_upgrade_count
The upgrades give 10% more efficiency for the first 6 upgrades (small upgrades) and 15% more efficiency for the last two upgrades (big upgrades).
The actual power draw on the Dyson Sphere can be calculated as such:
dyson_sphere_draw = (energy_output * 100) / ray_receiving_efficiency
For example, with a ray receiving efficiency of 75%, the power draw on the Dyson Sphere would be 16.6 MW at 100% "continous receiving".
Required Technology
Production Chain
To produce a Ray Receiver, the following raw materials are required to assemble all necessary sub-components:
- Iron Ore = 560
- Copper Ore = 110
- Silicon Ore = 40
- Stone = 120
- Coal = 40
Player Tips & Tricks
- On planets with a low axial inclination, place Ray Receivers at their poles for maximum exposure & efficiency. The poles of these planets are always within line of sight to your Dyson Sphere/Swarm.
- For planets with higher axial inclination, there is no such sweet spot. With the Planetary Ionosphere Utilization Technology, however, the line of sight restriction is removed, and they can be placed anywhere, so long as the planet has an atmosphere and you can keep them stocked with Graviton Lenses.